Three Great Crappie Fishing Tricks

When it comes to crappie fishing, there are two ways to fish for them. The first is known as “traditional.” You troll along the shore looking for crappie, cast your rod into the water, and wait. As soon as you feel a little bite, you quickly change direction and try again. This can be a frustrating way to go fishing, but eventually, you will get the hang of it. If you aren’t used to this method, it may be a good idea to give it a shot before moving on to the more modernized ways of fishing for crappie.

If you are looking for some tips to catch more crappie on your next fishing trip, read this article for a few great tricks. This article covers topics such as when to fish for crappie, using a brush pile, and soft bait rigging. We also cover when to use a Two Fish Rig. So, read on to learn some of our favorite tricks.

When to fish for crappie varies from region to region. Crappie tend to move into shallower waters after spawning, and during this time they will begin to build their nests close to vegetation. Females will follow the males to shallow areas, choose a mate, and lay eggs. Females lay an average of 40,000 eggs, but some may reach up to 180,000. Crappie will defend their eggs from predators, so when the spawning season starts, catching them can be a lot easier.

The best times to catch crappie are early in the morning or late at night. This is because crappie will be feeding on surface insects and minnows. As long as you use your bait and cover wisely, you can get a big catch. Crappie will usually stay in shallow water during the day, but they will migrate up to deeper waters as the sunsets. Once nightfall arrives, they’ll typically move into the shallows.

In the mid to late spring, when water temperatures reach 60 degrees, crappie will be most active in shallow waters. Because they eat in cooler water before the sun warms the water, catching them at this time is very important. Crappie also move fast, so a slow, steady presentation is key for catching them. If you want to find a large school of crappie, you should try fishing before dusk, because they are most active during the spawning season.

During winter, when the water is colder, you should start fishing at a deeper location. Bridge pilings are excellent spots to catch Crappie. The fish will be near the bridge pilings if the water temperature falls below ten degrees. In the spring, fishers should focus on shallow waters near deep cover or submerged trees. Using the right bait, you should be rewarded with a few bites.

When to fish for crappie in late fall is the most effective time. Crappie are homebodies and will not move much during the cold months of fall and winter. During this time, they will typically remain close to their source of food and will stay near it as much as possible. Even in deep iced water, crappie can be found. So, don’t be discouraged if you’re not seeing many of these beautiful fish.

Use A Two Fish Rig

One of the most successful ways to catch crappies is using a crankbait rig. These rigs consist of a spoon and small shad imitations. They are easy to use, but are especially effective when fishing in shallow waters. Depending on your fishing location, you may need to choose between cork and plastic bobbers. You may also want to try using a twin Road Runner. Tiny spinnerbaits are also a good choice for a two-armed rig.

One of the reasons why a tandem rig is so effective is because it provides extra casting weight and allows you to double your offerings. By working both rigs, you can test two levels of the water column. The JULIE’S BAKED CRAPPIE rig was created by Julie Meyer, a professional fisherwoman from Lake Eufaula, Okla. Meyer used wild rice and long grain to create a bait that works well in a crappie lake.

A slider rig is another popular rig. It is effective for shallow and deep water, and is ideal for catching a crappie. To use a slider rig, you will need three types of swivels, two 1/0 crappie hooks, Umbrella Crappie Tubes, and four, six, or eight-pound monofilament line. Once you have your bait ready, you’ll be ready to head out on the water.

While most people prefer the speed of drift fishing to lure crappie, a Two-Fish rig is equally effective in deep water. When fishing for crappie, you need to know that crappies move from deep waters to shallows for their spawning and breeding cycles. Because their mouths are so tender, they are easy to damage by a rough hookset. Therefore, your gear must have a little give.

When choosing a jig for your Crappie fishing trip, choose one that can provide you with the ability to quickly change depth without the need for a stopwatch. The jig must also be long enough to reach deep water without getting in the way of your bait. It should also be durable enough to withstand heavy pressure. Moreover, the hook must be short-shanked with upturned eyes.

Brush Pile Fishing

One of the most effective ways to catch crappies in the brush pile is by casting a jig into an open area and letting it drift downstream. Top anglers suggest repositioning your boat and using the same length and retrieve as you normally would. Changing the location of the brush pile will allow you to change the moment when the crappies are in their strike zone and will not spook them. To use this technique, you should paint your marker buoy in a dark color to make it harder for other anglers to spot it. You can also use your boat motor to relocate the marker buoy.

Top anglers often use brush piles and fallen shoreline trees as their primary targets. These locations are a favorite haunt of crappies and can be found in feeder creeks, rivers, bays, and natural lakes. However, most anglers do not know how to target the pilings five feet back. By using these structures as a target, you can be assured of hooking more than your share of crappie.

Most anglers head for the cover and shallow water when looking for crappies. The spawning area is where these species live. Try working jigs near brush piles or in deeper structure. The water temperature should not be more than 45°F. Once the water temperature is at this temperature, they will move deeper into the brush pile, which means you can work jigs around docks or in deeper structure.

Another effective technique is drifting. Drifting allows you to cover a lot of water and pinpoint roving schools. Use a depth finder to pinpoint structure. If you are using a jig, you can use two types of riggings. A fine wire hook and split shot work well with crappies. A float can be adjusted to cover different depths, so use a jig with a flexible body.

A jig is an excellent tool for most situations and is especially effective near brush piles. You can vertically cast it to crappies on many lakes, including those with large brush piles. Jigs with soft plastic bodies are ideal when targeting aggressive crappies near brush piles. Another good method is to position yourself over brush piles and drop your jig into the cover. This will sit in the strike zone, which will attract crappie to the bait.

Soft Baitrig

A Crankbait Rig is the best bait to use when trying to catch crappies in suspended mode. It is simple to set up and is made up of two pieces: a spoon and a small shad imitation. Using a Crankbait Rig is an easy method for beginners to learn. There are a lot of different bobbers to choose from.

A weedless jig with a long tail will be perfect for catching prespawn fish. Jigs with a longer tail and larger surface area will attract crappies and fall through the water column faster. Choosing the right type of jig is essential because crappies tend to strike a lure that sinks slowly. Once you find the best type of jig for your purpose, it will make the difference between success and failure.

This rig can be used for almost any situation. Crappies usually hide under large structures, like deep docks and overhanging limbs. It can also be used around docks and shore structures. Since it is so easy to set up, it is an excellent all-around technique. For a small jig, you can choose a size that’s 1/32 ounce or less.

This is another excellent trick for catching crappies. Soft bait rigs are a great way to get a bite from any location. They can be used in low-light conditions. Most of the time, these rigs are made with a jig that’s been tied with a feather. In clear water, a realistic-looking bait is the best choice.

The second trick is a slip bobber rig. Slip bobber rigs are also a great way to catch crappies. Slip bobber rigs are great for fishing in deeper water. You can feed the rig line through a small opening in the center of the bobber and then present your bait according to its depth. By using the Soft Baitrig, you’ll have a greater chance of catching crappies!

Lastly, you should fish near cover. Crappie will typically spawn near submerged stumps or flooded timber. They also like to hang out in deeper water, such as grass. Knowing the difference between these types of cover will help you prioritize your fishing spots. Using the Soft Baitrig is one of the three best tricks for crappie fishing. While crappies spawn near structure, they are less likely to hang around docks and other submerged objects. They prefer cover that is eight to 10 feet deep.


One thought on “Three Great Crappie Fishing Tricks

  1. This is my first year crappie fishing. I am totally hooked. I use the slip bobber minnows and soft bait . Now it’s summer after the spawn. Good info. I read them all and I get excited.

Leave a Reply Cancel reply