# Sandpaper Grit Numbers Explained: What the P Prefix Means

- Link: https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/
- Published: 2026-11-18T06:10:23-06:00
- Author: Bert Swope

On sandpaper, a lower grit number generally means a coarser abrasive, while a higher
number means a finer one within the same grading system. A P before the number identifies
the FEPA grading system used for coated abrasives. Keep that prefix when comparing
products: an identical number in another system does not necessarily describe the
same particle size.

The number is a starting point for choosing a sheet, disc, or sanding sponge. The
material being worked, the next coating, and the tool’s requirements still determine
what belongs in the shopping basket. A pack marked “fine” cannot answer all three
questions.

## Read the full grit marking

Look on the packaging and the back of the abrasive for a marking such as P120. Record
the whole marking rather than just 120. If you are replacing a product used successfully
on a project, keep its brand and product line too; grit is only one part of the 
specification.

[Norton’s technical information compares FEPA and CAMI grading](https://www.nortonabrasives.com/sites/mac3-acs-norton/files/Norton_Industrial_technical_data_health_safety_3.pdf)
in its coated-abrasives section. Its particle-size tables show why the systems should
not be treated as interchangeable across the range. A missing P is not enough by
itself to identify an unfamiliar product’s system; check the maker’s information.

Avoid converting by guesswork. If instructions specify a particular system or product,
use that specification or ask for a manufacturer-supported equivalent. For a delicate
finishing task, “the numbers look close” is not a useful compatibility test.

## Use coarse and fine as relative descriptions

Within one grading system, an 80-grit abrasive is coarser than a 180-grit abrasive.
Coarser grains generally remove material more aggressively and leave a rougher scratch
pattern. Finer abrasives are used where less material removal or a finer surface
is needed. They do not make every task better simply because their numbers are higher.

Words such as medium, fine, and extra fine help describe a range, but the printed
grit marking is the more useful record. Compare the number and grading system when
two packages use different descriptive words. A sanding sponge may also have more
than one abrasive face, so read how each face is identified.

Do not make a project’s first pass coarser merely because an assortment includes
a low number. The starting abrasive should suit the surface condition. A coarse 
sheet intended for substantial removal can damage a surface that needs only light
preparation.

## Let the next finish determine where to stop

[Norton’s bare-wood guidance](https://www.nortonabrasives.com/en-us/resources/expertise/bare-wood-sanding)
explains that the wood and intended finish affect the final sanding choice. That
is more useful than adopting one universal last grit for every stain, paint, and
clear finish.

Read the coating manufacturer’s surface-preparation instructions before buying abrasives.
Distinguish sanding bare material from sanding between coats; those are different
jobs. Check any required drying or curing interval before touching a coated surface
with sandpaper.

Suppose your project instructions specify P120 followed by P180 on an identified
bare-wood piece. Your purchase note should retain that sequence and the finish it
serves. It is not a reason to add P40 at the beginning or P400 at the end. This 
example illustrates following a specification, not a sanding schedule for every 
wood.

A finer step should address the preceding scratch pattern, rather than merely polishing
the tops of deep scratches. If scratches remain, inspect the work and the instructions
before jumping to a much higher number. Extra pressure is not a reliable substitute
for selecting the appropriate abrasive.

## Match the abrasive to the tool and material

After choosing the grit, check the product’s intended material and form. [Mirka’s abrasive overview describes how grain, backing, and suitability for wet or dry use differ](https://www.mirka.com/en-gb/products/abrasives-and-compounds/abrasives/).
A hand-sanding sheet, a cloth belt, and a film-backed disc are not interchangeable
supplies. If a backing is described by a letter or code, look up that product’s 
meaning instead of assuming the code is a universal quality grade.

For a powered sander, copy the required dimensions, attachment type, and dust-hole
arrangement from the tool’s instructions. A disc can have the correct diameter and
grit yet the wrong attachment. Keep the tool safely disconnected as its manual directs
when fitting accessories.

Wet-or-dry labeling also needs context. Use water only when the abrasive, workpiece,
and equipment permit it. A water-resistant abrasive does not make an ordinary electric
sander suitable for wet use.

Identify old coatings before disturbing them. [EPA warns that sanding lead-based paint can create hazardous dust](https://www.epa.gov/lead/renovation-repair-and-painting-rrp-program-consumers),
particularly in pre-1978 homes. Choosing a finer grit does not remove that hazard.
Follow appropriate lead-safe guidance and obtain qualified help where needed.

## Keep a usable replacement record

Save the packaging with the remaining sheets or write the full product identification
on a storage divider. Include grit and system, product line, dimensions, attachment,
and the project it was bought for. Keep different grits separated so a similar-colored
sheet does not become an unidentified substitute.

Store abrasives clean and dry as the manufacturer directs. If a sheet loses its 
marking, do not assign it a precise grit from how it feels. For a project that depends
on a known specification, use an identified replacement. The broader [repair-before-replacing guide](https://lifeandwork.blog/repair-before-replacing-smart-must-have-habit/)
can help decide which repair supplies are worth keeping for work you actually plan
to do.

### Share this:

 * [  Print ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/#print?share=print)
 * [More](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/#)

 * [  Pinterest ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=pinterest)
 * [  Tumblr ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=tumblr)
 * [  Facebook ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=facebook)
 * [  Email ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?subject=%5BShared%20Post%5D%20Sandpaper%20Grit%20Numbers%20Explained%3A%20What%20the%20P%20Prefix%20Means&body=https%3A%2F%2Flifeandwork.blog%2Fsandpaper-grit-numbers-p-prefix-explained%2F&share=email)
 * [  LinkedIn ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=linkedin)
 * [  Telegram ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=telegram)
 * [  WhatsApp ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=jetpack-whatsapp)
 * [  Reddit ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=reddit)
 * [  Threads ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=threads)
 * [  Mastodon ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=mastodon)
 * [  Nextdoor ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=nextdoor)
 * [  X ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=x)
 * [  Bluesky ](https://lifeandwork.blog/sandpaper-grit-numbers-p-prefix-explained/?share=bluesky)

### _Related_
